CBR600F4 parts

[Stacya_250]

Ok so today I get to look at my bike I'm sure I will have a big list of parts to replace! If any one knows were I can get them please let me know. I have looked on eBay there are lots of parts there but it takes hours to look throu all the bs adds. Thanks

[ryan6055]

Try this place. They are a online store but are also open to the public a day or 2 a week. Rex raider showed me this place and i was able to get a few things for a old ZX9 here. So hopefully you can get a few things you need also.
http://www.cyclepsycho.com/ They are right off Prairie rd.

[Stacya_250]

I checked and they didn't have any thing. But thanks

[TAT2D]

Hey man, sorry to hear what happened. I hope you are feeling better.

You might check here. It gets a lot of traffic, so check back often.
http://cbrforum.com/forum/




B

[Stacya_250]

Ok cool. Thanks after looking today it's going to take some work.

[loalge]

Once you get a list of parts you need together i'd be willing to help by "deal shopping" online . Let me know.

[tlrmike99]

When you get all the parts gathered up, I will donate the shop... drag it back downa nd a bunch of us can spend a day or two putting her back together... pitch some tents, make an overnight BBQ out of it!

[Stacya_250]

Ya sounds fun! But with the fact I still owe the bank and my high deductable if I keep it will just brake even. So getting it back together will take me some time. But you have a great idea! I will know more tomorrow I hope. Oh ya they called it a total but I will do the math. He couldn't give me any numbers today. I will keep all posted.
Thanks

[willcbr600rr]

... pitch some tents

:lol::lol::lol:

[Stacya_250]

Ok so today got good numbers from the insurance co. I'm going to keep it and have just enough to get only my plastics. And I found a great place to get them I will post the link up when I get on my computer, my iPod can't copy links. LOL

[Stacya_250]

http://www.nicecycle.com/

[Stacya_250]

Ok this is a short list of other things I know I will need. Fairing stay, battery tray, tail light, Cluch cover, gauge cluster. so if any one can find the parts let me know..

[Alex9101]

Damn The fairings are expensive there, even tho they look like the ones from Hong Kong on ebay...

YES I am so sure they are exactly the ones from Hong Kong but cost way more then on ebay!
It is of course you choice, but I would still try to fish out one by one used fairings from ebay and paint them when you have all of them... also I bet you will find all the other parts you listed on ebay with some time and much cheaper then anywhere else...

[loalge]

Probably should have asked before but what year is the bike?:thinking::idunno:

[Stacya_250]

Damn The fairings are expensive there, even tho they look like the ones from Hong Kong on ebay...

YES I am so sure they are exactly the ones from Hong Kong but cost way more then on ebay!
It is of course you choice, but I would still try to fish out one by one used fairings from ebay and paint them when you have all of them... also I bet you will find all the other parts you listed on ebay with some time and much cheaper then anywhere else...


I have looked on eBay to. I will be getting most of them there if I have to, but was hoping some one around here would have some.

Oh it's a 2000

[Stacya_250]

Ok this is a short list of other things I know I will need. Fairing stay, battery tray, tail light, Cluch cover, gauge cluster. so if any one can find the parts let me know..

Ok so a quick update I found my cluch cove and undertail tray. The hard one to find will be my faring stay. So if any one can find the right one let me know. The ones I have seen on eBay are for an RR.

[Alex9101]

http://www.bikebandit.com/

Looks like the stay is 114 bucks there, also there might be some small parts you can find there for cheap, but big parts are ridiculously expensive...

Stay on ebay for 110:
http://cgi.ebay.com/ebaymotors/99-00-Honda-CBR-600-F4-Fairing-Bracket-Stay_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a 4Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q 3a1Q7c294Q3a200QQ_trksidZp3286Q2ec0Q2em14QQhashZit em120402703936QQitemZ120402703936QQptZMotorcyclesQ 5fPartsQ5fAccessories

[Stacya_250]

http://www.bikebandit.com/

Looks like the stay is 114 bucks there, also there might be some small parts you can find there for cheap, but big parts are ridiculously expensive...

Stay on ebay for 110:
http://cgi.ebay.com/ebaymotors/99-00-Honda-CBR-600-F4-Fairing-Bracket-Stay_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a 4Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q 3a1Q7c294Q3a200QQ_trksidZp3286Q2ec0Q2em14QQhashZit em120402703936QQitemZ120402703936QQptZMotorcyclesQ 5fPartsQ5fAccessories


Great find.! Thanks looks like the only big item left is a muffler

[tlrmike99]

Stacy, did you cluster still work??? If so you could run with that one for a while til you find/have $$ for a new one... would get you back on the road faster. Also, for OEM stuff I have found www.ronayers.com (http://www.ronayers.com) has good prices.....:thumbup:

[Stacya_250]

Stacy, did you cluster still work??? If so you could run with that one for a while til you find/have $$ for a new one... would get you back on the road faster. Also, for OEM stuff I have found www.ronayers.com (http://www.ronayers.com) has good prices.....:thumbup:

Thanks Mike
If it still works I can buy a new outer shell for it for only 200 so way cheaper then the 600+ for a new one.. I think I'm all set just ordered my rear brake lever today. So when I get my cluch cover make sure it still runs then I will order my plastics. Oh and i will not ride till it is completely finished and rebuy all my gear..lol:crash:

[roadrunner]

once the bike is good, im sure there are a few of us that could help you gear up until you get going on that

[Stacya_250]

once the bike is good, im sure there are a few of us that could help you gear up until you get going on that

Cool :thumbup: oh did you say you found a lock? I think it's my seat lock. LOL

[tlrmike99]

I got some 2 pc. leathers... you probably wouldn't need boots... we could just zip tie together whatever hangs over you feet...LOL!!!:victory-s

[Stacya_250]

I got some 2 pc. leathers... you probably wouldn't need boots... we could just zip tie together whatever hangs over you feet...LOL!!!:victory-s
Lmao I don't think I would need gloves ether. LOL now let's not make fun of little people. LOL

[roadrunner]

Cool :thumbup: oh did you say you found a lock? I think it's my seat lock. LOL


im pretty sure thats the lock i have. one less thing to get. the mount bracket is bent a bit but im positive can be returned to good. now when we have fix day, ill be some good!!! :thumbup:

[roadrunner]

Lmao I don't think I would need gloves ether. LOL now let's not make fun of little people. LOL



hehe.. now THATwould be a true 2 piece!! more like a body suit with the footies and handies(??) included... youre almost back to it!!!! :clapping:

[roadrunner]

and the other thing(26 posts later, sorry) i thought about was having a fund ride.. each rider could donate 5 dollars or whatever, and the end of the ride would be to you to de3liver the dollars. alone it isnt much but suport together helps out. 20 or 40 dollars might get you...... idk, some bolts, a few qts of oil, grips, something.. i will for sure ride this one. and itd be cool to get those who were part of the ride the day it went down.. just an idea

[Stacya_250]

I will know more tusday when I get my cover when and if it runs I will start ordering my parts.

As for a fund razing ride it's a nice idea but I would not feel right having others pay for my lack of brain power. LOL but it's a nice jesture and that means alot to me. Every one has been great to me and helpful. I'm just happy to be apart of a comunity that takes care of every one. Just hope one day I can do so in return! Thanks

[MTS620]

As for a fund razing ...

Getting the parts together will probably raze your funds. Probably best not to plan an additional fund razing. :yes:
:hump

BTW, I'm glad to help out with the bike anyway I can. I live close so it wouldn't be hard for me to drop by. I'm not much of a mechanic, but I can help get it loaded into a truck, up on stands or just help you move heavy parts if you're still sore. I also have stands and a ramp, if you need to borrow them. Just say the word.

-Mats

[Stacya_250]

:hump

BTW, I'm glad to help out with the bike anyway I can. I live close so it wouldn't be hard for me to drop by. I'm not much of a mechanic, but I can help get it loaded into a truck, up on stands or just help you move heavy parts if you're still sore. I also have stands and a ramp, if you need to borrow them. Just say the word.

-Mats

Thanks
I'm set on most things for now. But Tuesday or Wednesday I could use some help getting it on the stand and taking off the fairing. I think I have your number some place..lol I will look in my in box to see if its there. My plan is to put the cluch cover on and see if it runs. then I will start the hard part..:thumbup:

[roadrunner]

is this going down at tlr's??

[Stacya_250]

Went I put it all together I can do it there. But my first step is to make sure it runs. LOL

[roadrunner]

cool. id like to participate.. might learn something